Lorry Electronics TLC 100 TVC

Lorry Electronics with the temperature compensation destined for the tank-trucks

Brief Description

The Lorry Electronics TLC 100 TVC is intended for the measurement of the discharged diesel, petrols or LPG from the tank-trucks and in the bonding warehouse. This electronic device can be installed directly to the flowmeter into the dispensing space with the explosion hazard. The display indicates the name of the product, its temperature and the discharged amount. It is possible to adjust also the preselection of the amount to be discharged. The receipt is printed automatically on the printer located in the driver's cab after the termination of the discharging. The type of the discharged product can be adjusted by the operator by using the remote control. Product parameters are introduced and set by the technician at the moment of the metrological calibration once a year. Well aranged balance sheet indicating the initial and the final status of the general and daily indicators is printed out at the end of the workshift.

The backbone of the Lorry Electronics is the electronic site controlling unit with a power supply unit and white backlighted graphic display. The electronics is placed inside the robust aluminium case with the flameproof enclosure (EEx d). The display is located in the vane on the front side of the case. The Lorry Electronics is to be connected to one flow meter and it can measure the temperature of one product and provide the gauging (if the probe is connected) in one tank.

The attendant can invoke the grand total and daily total on the display, print the receipt indicating the discharging, daily balance sheet and set to zero the indicator of the daily total. The forms of the receipt and daily balance sheets are adjusted according to the operator's requirements at the moment of the installation of the device. The forms can be further changed when a device is connected to the laptop.

The metrological parameters are protected by the official seal and they cannot be changed without its breaking. It is possible to connect several Lorry Electronics by the data cable to provide the multiproduct evidence. Subsequently, all the Lorry Electronic Heads then use the one common printer.

Use

Indicator of the output of fuels and LPG
Measurement of the discharged amount in the explosion hazard zone
Replacement to the old mechanical dispenser heads
Replacement to the dispenser heads without the temperature compensation
Electronics for new tank-trucks and fuel bonding warehouses

Advantage

Temperature compensation, recalculation to 15°C
Possibility of the gauging and displaying the liquid level of the tank
Presetting of the discharged amount
Print of receipts and total balance sheet per workshift
Clear indication of the data on the display, large digits
Guarantee of the high reliability and low cost
Valid Metrologic Certificate (by the CMI) for the diesel, petrols and LPG

Technical Specification

Input for one flowmeter, optically isolated
One 4 -20mA input for gauging
One 4 - 20mA input for measurement of the temperature
Output for the operating valve, relay max. 2A
Interface RS-232 for the receipt printer
Interface RS-232 for the computer connection
Backlighted graphic display, 256 x 64 pixels
The grand total and daily indicators
Designed for the EExd II C T6 environment
Dimensions 233x233x152mm, weight 8kg
Power supply 24V DC, 24 VA
Operational temperature from -20 up to +50°C

QUITEC s.r.o.